Yamaha ATS-1520 Owner'S Manual Download Page 19

Page: 19 / 22

Bluetooth

Problem

Cause

Remedy

Cannot make the
sound bar paired
with the

Bluetooth

device.

BLUETOOTH is not selected as
the input source.

Select BLUETOOTH as the input
source.

The device does not support
A2DP.

Perform pairing operations with a
device which supports A2DP.

Bluetooth

adaptor, etc. that you

want to pair with the sound bar
has a password other than
“0000”.

Use a

Bluetooth

adaptor, etc. whose

password is “0000”.

The sound bar and device are too
far apart.

Move the device closer to the sound
bar.

There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.

Move this unit away from the device
that is emitting radio frequency
signals.

Another

Bluetooth

device is

connected.

Terminate current

Bluetooth

connection, and perform pairing with
the new device.

Cannot make a

Bluetooth

connection.

Another

Bluetooth

device is

connected.

The sound bar cannot make multiple

Bluetooth

connections. Terminate

current

Bluetooth

connection, and

make connection for the desired
device.

More than nine devices are paired
and the oldest pairing information
is deleted.

Perform pairing again. The sound bar
can retain pairing information for up to
eight devices. When pairing a ninth
device, the oldest pairing information
will be deleted.

No sound is
produced or the
sound is
interrupted
during playback.

The

Bluetooth

connection of the

sound bar with the device is
disconnected.

Perform

Bluetooth

connection

operations again (p.8).

The sound bar and device are too
far apart.

Move the device closer to the sound
bar.

There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.

Move this unit away from the device
that is emitting radio frequency
signals.

The device’s

Bluetooth

function is

off.

Activate the

Bluetooth

function of the

device.

The device is not set to send

Bluetooth

audio signals to the

sound bar.

Check that the

Bluetooth

function of

the device is set properly.

Playback on the device has not
been performed.

Perform playback on the device.

The device’s volume is set to
minimum.

Turn up the volume level.

Summary of Contents for ATS-1520























Search results

Summary of Contents for ATS-1520

Reviews:

Related manuals for ATS-1520

Brands by name

Popular brands

Yamaha ATS-1520, Owner'S Manual

Search results

Summary of Contents for ATS-1520

Reviews:

Related manuals for ATS-1520

Brands by name

Popular brands