Yamaha AS1000 - Amplifier, Owner'S Manual, Page: 16 / 212

16
En
Connections
If you use two sets (A and B), the impedance of each speaker
must be 8
Ω
or higher. When only using one set of speakers (A or
B), use speakers with an impedance of 4
Ω
or higher.
■
Connecting the speakers
1
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and twist the exposed wires of the
cable together to prevent short circuits.
2
Unscrew the knob and then insert the bare
wire into the hole.
3
Tighten the knob.
■
Connecting the speakers using the
banana plug
(Except for Europe models)
First, tighten the knob and then insert the banana
plug into the end of the corresponding terminal.
■
Connecting the speakers using the
Y-shaped lug
1
Unscrew the knob and then sandwich the
Y-shaped lug between the ring part and base.
2
Tighten the knob.
Caution
10 mm (0.4 in)
Banana plug
Y-shaped lug
Slide