Keyboard Stand Assembly
Owner’s Manual
58
ENGLISH
Keyboard Stand Assembly
CAUTION
• Assemble the stand on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please
assemble the unit in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of
incorrect screws can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of the unit.
• To disassemble the unit, reverse the assembly sequence given below.
Remove all parts from the package and make sure you have all of the items.
Have a Philips-head (+) screwdriver of the appropriate size ready.
B
E
D
A
C
C
Foamed styrol pads
Remove foamed styrol pads from the package, position
them on the floor, then place A on top of them.
Position the pads so that they will not hide the connectors
on the bottom of A.
A bundled pedal cord is attached to the reverse side.
6 x 20 mm long screws x 4
6 x 16 mm short screws x 4
4 x 12 mm thin screws x 2
4 x 10 mm thin screws x 2
4 x 20 mm tapping
screws x 4
Headphone hanger
Headphone hanger
Cord holders x 2
Power cord
Assembly Parts
Adjuster (x 1)
