Selecting & Playing Voices
Owner’s Manual
25
ENGLISH
Combining Two Voices (Dual mode)
You can play two voices simultaneously across the entire range of the keyboard. In this way, you
can simulate a melody duet or combine two similar voices to create a thicker sound.
1.
Engage Dual mode.
Press two voice buttons at the same time (or press one voice button while holding
another). The voice indicators of both selected voices will light when Dual mode
is active.
• According to the voice numbering
priority shown in the diagram on
the right, the lower value voice
number will be designated as Voice
1 (the other voice will be desig-
nated as Voice 2).
The Function mode provides access to a number of other Dual mode functions,
such as volume balance setting or octave setting (page 46). (If you do not set
Dual mode functions, the appropriate setting will be set in each voice by
default.)
2.
Exit Dual mode and return to normal play mode.
To return to the normal single-voice play mode, press any single voice button.
2
1
Procedure
NOTE
[REVERB] in Dual Mode
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to OFF,
Voice 2 reverb type will be in
effect.)
NOTE
[EFFECT] in Dual Mode
Depending on the conditions, one
effect type may take priority over
the other. Depth will be decided
according to the depth default
value of the voice combination.
However, using function F3 (page
46) you can adjust the depth
value for each voice to your liking.
1
2
12
13
14
3
4
5
6
7
8
9
10
11
Voice numbering priority
