YDP-135 Owner’s Manual
Before Using the Digital Piano
11
ENGLISH
Turning the Power On
1
Make sure that the [
] (Standby/On) switch is turned off and the [MASTER VOLUME] is set to the
MIN position.
2
Make sure that the power cord is connected to DC IN jack (page 33).
3
Insert the plug on the other end of the power cord into a standard AC outlet.
4
Press the [
] (Standby/On) switch on the right end of the keyboard to turn on the power to the unit.
The power indicator located below the left end of the keyboard lights up.
Press the [
] (Standby/On) switch again to turn off the power to the unit.
The power indicator turns off.
WARNING
• Be sure to use an appropriate AC outlet.
• Be sure to use a specified power adaptor. Using a different power adaptor may cause malfunction, overheating, or fire.
CAUTION
• A small amount of electrical current remains even after the [
] (Standby/On) switch has been turned off.
• If you plan not to use the instrument for an extended period of time, or if there is a possibility of lightning striking, be sure
to unplug the instrument from the AC outlet.
Setting the Volume
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Power indicator
[
] (Standby/On) switch
The level
decreases.
The level
increases.
