manualshive.com logo in svg

Yamaha APEX RX10RY, Owner'S Manual

The Yamaha APEX RX10RY is a high-performance snowmobile built for thrill-seekers and outdoor enthusiasts. To unleash its full potential, it is essential to have the Owner's Manual. Download the detailed manual for free from manualshive.com to optimize your experience with this exceptional machine.

Share
Download
background image

Periodic maintenance and adjustment

45

NOTICE

ECS00370

Make sure that all cables, leads, etc., are
routed properly before installing the
shroud and covers.

TIP

When installing the shroud and covers, be
sure to tighten all fasteners securely.

ESU11782

Checking the spark plugs 

The spark plug is an important engine compo-
nent and is easy to inspect. The condition of
the spark plug can indicate the condition of
the engine.
Check the coloration on the white porcelain
insulator around the center electrode. The
ideal coloration at this point is a medium to a
light tan color for a snowmobile that is being
ridden normally. If a spark plug shows a dis-
tinctly different color, there could be some-
thing wrong with the engine. For example, a
very white center electrode porcelain color
could indicate an intake track air leak or car-
buretion problem for that cylinder. Do not at-
tempt to diagnose such problems yourself.
Instead, take the snowmobile to a Yamaha
dealer for inspection and possible repairs.
You should periodically remove and inspect
the spark plug because heat and deposits will
cause a spark plug to slowly break down and
erode. Consult a Yamaha dealer before
changing to a different type of spark plug.

WARNING

EWS00710

Be sure to use the specified spark plug
and spark plug cap. Otherwise, the
T.O.R.S. may not work properly.

Spark plugs are produced in several different
thread lengths. The thread length or reach is
the distance from the spark plug gasket seat
to the end of the threaded portion. If the reach
is too long, overheating and engine damage
may result. If the reach is too short, spark plug
fouling and poor performance may result. Al-
so, if the reach is too short, carbon will form on
the exposed threads resulting in combustion
chamber hot spots and thread damage. Al-
ways use a spark plug with the specified
reach.

Before installing any spark plug, measure the
electrode gap with a wire thickness gauge
and adjust to specification.

Specified spark plug:

Manufacturer:

NGK

Model:

CR9EB

Spark plug reach:

19.0 mm (0.75 in)

1. Spark plug gap
2. Spark plug reach

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

U8FP14E0.book  Page 45  Friday, March 28, 2008  6:37 PM

Summary of Contents for APEX RX10RY

































































































Reviews:

No comments

Related manuals for APEX RX10RY

Brands by name

Popular brands

Load more brands