background image

5

SOFTWARE for MAGICSTOMP     Installation Guide

Installing the Sound Editor for 
MAGICSTOMP

1

Insert the included CD-ROM into the CD-ROM drive. The name of the CD-
ROM (X4770A0) appears in “My Computer”.

2

Click on the CD-ROM icon to open, then double-click on the "Tools" 
folder.
“Setup.exe” and some other files appear.

2

 Double click on the “Setup.exe” file.
The “Sound Editor for MAGICSTOMP” setup dialog appears.

3

 Follow the instructions on the display to install the application.

4

 After installation is complete, restart the computer.

After restarting the computer you’ll find the “YAMAHA” folder has been 
added (default: Program Files) and the “SGP Tools” folder has been created 
in it.

Installation of the Sound Editor for MAGICSTOMP is complete.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Sound Editor Startup and Settings

After the drivers and Sound Editor for MAGICSTOMP are installed, follow the 
steps below to start the Sound Editor for MAGICSTOMP application and set the 
necessary settings.

1

From the “Start” menu, select “Program”

“YAMAHA SGP 

Tools”

“Sound Editor for MAGICSTOMP”

“Sound Editor for 

MAGICSTOMP”.

2

The Sound Editor for MAGICSTOMP starts.
After the MAGICSTOMP Setup tool bar shown below appears, click on the 
MAGICSTOMP Setup button.

3

Clicking the MAGICSTOMP Setup buttons opens the Setup dialog box. Set 
the relevant MIDI ports (IN/OUT/THRU) to use the connected 
MAGICSTOMP. 
The following are normal settings.

In ................................ Set to “YAMAHA ISB IN 0-1”

Out ............................. Select “YAMAHA ISB OUT 0-1”

thru ............................ Select “NONE”

4

Click the Editor Setup Button in the library window’s tool bar to open the 
Editor Setup dialog box. 

5

Set the appropriate in/output ports or device number to allow 
communication between the Sound Editor and MAGICSTOMP.

n

Refer to the “Sound Editor for MAGICSTOMP Manual” PDF 
manual in the accompanying CD-ROM’s “Manual” folder for more 
information on the Editor Setup Dialog box.

MAGICSTOMP Setup button

Editor Setup Button

Summary of Contents for Acoustic












Reviews: