Yamaha 820S Owner'S Manual Download Page 56

Page: 56 / 72

CLP-880/860/840/820/820S

The CLP-860/840/820 all require the same assembly

procedures. Illustrations use the CLP-860 for reference.

• Be careful not to confuse parts, and be sure to install all parts in the

correct direction. Please assemble in accordance with the sequence
given below.

• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated above. Use of

incorrect screws can cause damage.

• Be sure to tighten up all screws upon completing assembly of each

unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready.

Open the box and remove all the parts.

On opening the box you should find the parts shown in the

illustration. Check to make sure that all the required parts are
provided.

CLP-860/840/820:

Keyboard Stand Assembly

5 x 40 mm long gold screws

6 x 20 mm round-head screws

4 x 12 mm round-head screws

4 x 20 mm tapping screws

6 x 16 mm flat-head screws

Bundled pedal cord inside

x 6

x 4

x 2

x 4

●

Cord holders

x 2

●

AC power cord

Summary of Contents for 820S









































































Search results

Summary of Contents for 820S

Reviews:

Related manuals for 820S

Brands by name

Popular brands

Yamaha 820S, Owner'S Manual

Search results

Summary of Contents for 820S

Reviews:

Related manuals for 820S

Brands by name

Popular brands