Yamaha 6Y8-2819V-00, Owner'S Manual

Page: 31 / 36

26
Spe
ed
& Fuel
meter
un
it
02 (setting fuel sensor)
You can set the fuel sensor type that is con-
nected to this meter.
1.
Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (1 second): To switch between
the setting function numbers and to
switch to the change settings display.
4. : Press to switch between the fuel
sensor types.
5. (1 second): To change the fuel
sensor type and return to the normal
display.
03 (setting correction value)
You can calibrate the displayed fuel flow
value within –7 to +7 percent. The difference
in the fuel consumption display and the
actual fuel consumption is calibrated.
Checking the calibration value:
1.
Operate the outboard motor on a full
tank of fuel.
2. After operating the outboard motor, fill
the fuel tank. Compare the amount of
fuel filled into the fuel tank with the fuel
consumed shown on the fuel consump-
tion display and set the calibration value
to the difference if necessary.
Changing the calibration value:
1.
Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (1 second) (2 times): Press to
switch between the setting function
numbers and to switch to the change
settings display.
4. : Press to switch between the cali-
bration values.
5. (1 second): To change the cali-
bration value and return to the normal
display.
-1- (ABYC-US)
-3- (YAMAHA)
-2- (EUROPE)
Blinks
02 (setting fuel sensor)/03 (setting correction value)