3-31
GB
EMH60010
CRUISING IN OTHER
CONDITIONS
CRUISING IN SALT WATER
After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
CRUISING IN TURBID WATER
It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
402011
EMG71710
PROCEDURE
1)
Place the gear in the neutral position.
2)
Pull the tilt-lock lever up to the Tilt
position.
3)
Slightly tilt up the engine to the
desired position and push the tilt-lock
lever down to the Lock position.
4)
To return the engine to the normal
position, pull the tilt-lock lever up to
the Tilt position and slowly tilt the
engine down.
5)
Push the tilt-lock lever down to the
Lock position.
63B-9-78-A0-3b 2/17/03 4:57 PM Page 32
