– 34 –
CHAS
FRONT BRAKE
3.Install:
●
Copper washers
●
Brake hose
●
Union bolt
NOTE:
●
Tighten the union bolt while holding the
brake hose as shown.
●
Check that the brake hose does not touch
other parts (throttle cable, wire harness,
leads, etc.) by turning the handlebar left and
right, and correct if necessary.
WARNING
●
Proper hose routing is essential to insure
safe machine operation. Refer to “CABLE
ROUTING”.
●
Always use new copper washers.
4.Install:
●
Brake lever
T
R
.
.
Union bolt:
27 Nm (2.7 m • kg, 19 ft • lb)
5.Fill:
●
Brake master cylinder reservoir
NOTE:
If DOT 4 is not available, 3 can be used.
CAUTION:
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
WARNING
●
Use only the designated quality brake
fluid: otherwise, the rubber seals may
deteriorate, causing leakage and poor
brake performance.
Recommended brake fluid:
DOT 4
