– 12 –
SPEC
CABLE ROUTING
1
Wire harness
2
Starter motor lead
3
Rear brake cable
4
Throttle cable
5
Starter relay
6
Rectifier/regulator
7
CDI unit
8
Starting circuit cut-off relay
9
Rear brake breather hose
0
Carburetor air vent hose
A
Final gear case breather hose
B
Taillight lead
Å
Fasten the wire harness to the frame with the plastic clamps.
ı
Make sure the starter motor lead and wire harness do not contact the
ignition coil.
Ç
Fasten the wire harness, starter motor lead, and ignition coil lead to
the frame with the plastic locking tie.
Î
Fasten the wire harness and starter motor lead to the frame with the
plastic locking tie.
‰
Install the starter relay onto the tabs with its terminal side facing up.
