Using, Creating and Editing Songs
Recording Your Performance
CVP-409/407 Owner’s Manual
146
2
While holding the SONG [REC] button,
press the [1
π
π
π
π†
†
†
†
]–[8
π
π
π
π†
†
†
†
] buttons to
set the desired channels to “REC”.
Normally, the keyboard parts should be
recorded to channels 1–8, and the Styles
should be recorded to channels 9–16. To
cancel the channel selection, press the
SONG [REC] button again.
3
Use the [C]/[D] buttons to select the
desired part for the channel to be
recorded.
This determines which part—keyboard or
Style (Rhythm 1/2, Bass, etc.)—is recorded
to each of the channels selected in step 2.
Default channel/part assignments are
shown in the section “About Song chan-
nels” (page 147).
To close PART selection display, press the
[EXIT] button.
4
Start recording.
The method for starting is the same as in step 4 of Quick Recording (page 145).
5
Press the SONG [STOP] button to stop recording.
When recording is finished, a message appears prompting you to save the
recorded performance appears. To close the message, press the [EXIT] but-
ton. For instructions on saving Song data, see step 8.
6
Listen to your newly recorded performance. Press the SONG [PLAY/
PAUSE] button to playback the performance you just recorded.
7
To record another channel, repeat steps 2 through 6.
Setting all of the 9–16 chan-
nels to “REC” simultaneously
While holding the SONG [REC]
button, press the SONG [EXTRA
TRACKS (STYLE)] button.
When selecting the MIDI part
• Setting a single channel to
MIDI
All incoming data received via
any of the MIDI channels 1–16
is recorded. When using an
external MIDI keyboard or
controller to record, this lets
you record without having to
set the MIDI transmit channel
on the external device.
• Setting several channels to
MIDI
When using an external MIDI
keyboard or controller to
record, this records data only
over the set MIDI channel—
meaning the external device
must also be set to the same
channel.
Recording each channel with
the same tempo
Use the Metronome function
(page 30) to record each channel
with the same tempo. Keep in
mind that the metronome sound
is not recorded.
Pausing and restarting your
recording
While holding the SONG [REC] but-
ton, press the [2
π
] button to set the
channel 2 to “REC”.
2
3
+
Press the [D] button to select
the “RIGHT2”.