Yamaha 407 Owner'S Manual Download Page 104

Page: 104 / 232

Using, Creating and Editing

oices

Voice Creating (Sound Creator)

CVP-409/407 Owner’s Manual

104

In the ORGAN FLUTES Voice Selection display, press the [6

] (FOOT-

AGE) button to call up the VOICE SET [ORGAN FLUTES] display.

Use the TAB [

√

][

] buttons to call up the relevant setting display.

For information on the available parameters, see the following “Editable
Parameters in the VOICE SET [ORGAN FLUTES] displays.”

If you select the EFFECT/EQ tab display, use the [A]/[B] buttons to
select the parameter to be edited.

Use the [A]–[D], [F]–[H] and [1

π†

†

]–[8

π†

†

] buttons to edit the

Voice.

Press the [I] (SAVE) button to save your edited ORGAN FLUTES Voice
(page 69).

(When selecting
the EFFECT/EQ
tab display.)

CAUTION

If you select another Voice
without saving the settings,
the settings will be lost. If you
wish to store the settings
here, make sure to save the
settings as a User Voice before
selecting another Voice or
turning the power off.

Summary of Contents for 407









































































































































































































































Search results

Summary of Contents for 407

Reviews:

Related manuals for 407

Brands by name

Popular brands

Yamaha 407, Owner'S Manual

Search results

Summary of Contents for 407

Reviews:

Related manuals for 407

Brands by name

Popular brands