Yamaha 2011 FZ8NA(C), Service Manual, Page: 14 / 478

FEATURES
1-5
5. Push the “RESET” button to set the min-
utes.
6. Push the “SELECT” button and then
release it to start the clock.
Odometer and tripmeter modes
Push the “SELECT” button to switch the dis-
play between the odometer mode “ODO” and
the tripmeter modes “TRIP A” and “TRIP B” in
the following order:
TRIP A
→
TRIP B
→
ODO
→
TRIP A
When the fuel amount in the fuel tank
decreases to 3.4 L (0.90 US gal, 0.75 Imp.gal),
the left segment of the fuel meter will start
flashing, and the odometer display will auto-
matically change to the fuel reserve tripmeter
mode “F-TRIP” and start counting the distance
traveled from that point. In that case, push the
“SELECT” button to switch the display between
the various tripmeter and odometer modes in
the following order:
F-TRIP
→
TRIP A
→
TRIP B
→
ODO
→
F-
TRIP
To reset a tripmeter, select it by pushing the
“SELECT” button, and then push the “RESET”
button for at least one second. If you do not
reset the fuel reserve tripmeter manually, it will
reset itself automatically and the display will
return to the prior mode after refueling and
traveling 5 km (3 mi).
Fuel meter
The fuel meter indicates the amount of fuel in
the fuel tank. The display segments of the fuel
meter disappear towards “E” (Empty) as the
fuel level decreases. When the last segment
on the left starts flashing, refuel as soon as
possible.
TIP
This fuel meter is equipped with a self-diagno-
sis system. If a problem is detected in the elec-
trical circuit, the following cycle is repeated
until the malfunction is corrected: fuel level
segments and symbol “ ” flash eight times,
then go off for approximately 3 seconds.
Coolant temperature display
The coolant temperature display indicates the
temperature of the coolant.
ECA10021
Do not continue to operate the engine if it is
overheating.
1. Odometer/tripmeter/fuel reserve tripmeter
1. Fuel meter
1. Coolant temperature display