Yamaha 2010 XVS1300AZ Owner'S Manual Download Page 60 | Manualshive

Page: 60 / 92

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-18

7

braking performance, which may re-
sult in loss of control and an acci-
dent.

EAU22273

Brake light switches

The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).

EAU22392

Checking the front and rear
brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear

1. Rear brake light switch

2. Rear brake light switch adjusting nut

(a)

2

1

(b)

1. Brake pad wear indicator groove

U12C23E0.book Page 18 Tuesday, October 20, 2009 4:17 PM

«
...
58
59
60
61
62
...
»

Summary of Contents for 2010 XVS1300AZ





























































































Reviews:

No comments

Related manuals for 2010 XVS1300AZ

Brand: hepco & becker Pages: 2

Brand: GAS GAS Pages: 119

Brand: yasuni Pages: 12

Brand: NEO TOOLS Pages: 8

TorqDrive Clutch Pack

Brand: Rekluse Pages: 18

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 435

Brand: Kinderkraft Pages: 36

Brand: R&G Pages: 6

Brand: R&G Pages: 9

Brand: R&G Pages: 6

Brand: R&G Pages: 6

Brand: R&G Pages: 9

Brand: R&G Pages: 17

Brand: R&G Pages: 25

Brand: R&G Pages: 24

Brand: R&G Pages: 21

Brand: R&G Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands