CHANGING THE COOLANT
7. Fill:
8cooling system
(with the specified amount of the recom-
mended coolant)
«0
Recommended antifreeze
High-quality ethylene glycol anti-
freeze containing corrosion inhibi-
tors for aluminum engines
Mixing ratio
4:6(antifreeze:water)
Quantity
Total amount
0.50L(0.46 Imp qt, 0.53 US qt)
Coolant reservoir capacity
0.26L(0.23 Imp qt, 0.28 US qt)
Up to the maximum level mark
NOTE:
The specified amount of coolant is a standard
amount. Fill the cooling system with coolant un-
til coolant comes out of the air bleed bolt hole.
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
w
If coolant splashes in your eyes, thor-
oughly wash them with water and con-
sult a doctor.
If coolant splashes on your clothes,
quickly wash it away with water and
then with soap and water.
If coolant is swallowed, induce vomiting
and get immediate medical attention.
c
C
Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant check,
and if necessary, correct the antifreeze
concentration of the coolant.
Use only distilled water. However, if dis-
tilled water is not available, soft water
may be used.
If coolant comes into contact with
painted surfaces, immediately wash
them with water.
Do not mix different types of antifreeze.
8. Install:
8radiator cap
3-38
Downloaded
from
www.ScooterTime.net
