CHARGING SYSTEM
ELEC
+i
NOTE:
Make sure the battery is fully charged.
•
Is the charging voltage within specification?
*
NO
YES
l z
The charging circuit is
OK.
EAS00776
4. Stator coil resistance
•
Disconnect the starter coil coupler from
wireharness.
•
Connect the pocket tester (
Q x
1) to the sta-
tor coil as shown.
Positive tester probe
-»
white
1
Negative tester probe
->
white
2
•
Measure the stator coil resistances.
SI
Stator coil resistance
0.28 ~ 0.42 at 20°C (68°F)
•
Is the stator coil OK?
YES
V
4
NO
Replace the crank-
shaft position sensor/
stator coil assembly.
EAS00779
5. Wiring
•
Check the wiring connections of the entire
charging system.
Refer to “CIRCUIT DIAGRAM”.
•
Is the charging system’s wiring properly con-
nected and without defects?
V
YES
4
NO
Replace the recti-
fier/regulator.
Properly connect or re-
pair the charging
system’s wiring.
8-26
Downloaded
from
www.ScooterTime.net