Yamaha 2006 GRIZZLY 125 Owner'S Manual Download Page 60

Page: 60 / 153

Apparel

POTENTIAL HAZARD

Operating this ATV without wearing an

approved motorcycle helmet, eye protec-

tion and protective clothing.

WHAT CAN HAPPEN

Operating without an

approved motorcy-

cle helmet increases

your chances of a

severe head injury or

death in the event of

an accident.

Operating without

eye protection can

result in an accident

and increases your

chances of a severe

injury in the event of

an accident.

7-7

Operating without protective clothing

increases your chances of severe injury in

the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved motorcycle hel-

met that fits properly.

You should also wear:

eye protection (goggles or face shield)

gloves

boots

long-sleeved shirt or jacket

long pants

WARNING

Gloves

Goggles

Boots

Helmet

Protective
clothing

1C5-9-12-2 3/2/05 7:03 PM Page 7-7

Summary of Contents for 2006 GRIZZLY 125


























































































































































Search results

Summary of Contents for 2006 GRIZZLY 125

Reviews:

Related manuals for 2006 GRIZZLY 125

Brands by name

Popular brands

Yamaha 2006 GRIZZLY 125, Owner'S Manual

Search results

Summary of Contents for 2006 GRIZZLY 125

Reviews:

Related manuals for 2006 GRIZZLY 125

Brands by name

Popular brands