Yamaha 2006 GRIZZLY 125 Owner'S Manual Download Page 136

Page: 136 / 153

7. Clean the seat with a vinyl upholstery clean-

er to keep the cover pliable and glossy.

8. Automotive type wax may be applied to all

painted and chrome plated surfaces. Avoid

combination cleaner-waxes. Many contain

abrasives which may mar the paint or pro-

tective finish.

When finished, start the engine and let it idle

for several minutes.

9-2

POTENTIAL HAZARD

Operation with wet brakes after washing.

WHAT CAN HAPPEN

Wet brakes may have reduced stopping

ability, increasing the chance of an acci-

dent.

HOW TO AVOID THE HAZARD

Test the brakes after washing. Apply the

brakes several times at slow speeds to let

friction dry out the linings.

WARNING

1C5-9-12-3 3/11/05 10:02 AM Page 9-3

Summary of Contents for 2006 GRIZZLY 125


























































































































































Search results

Summary of Contents for 2006 GRIZZLY 125

Reviews:

Related manuals for 2006 GRIZZLY 125

Brands by name

Popular brands

Yamaha 2006 GRIZZLY 125, Owner'S Manual

Search results

Summary of Contents for 2006 GRIZZLY 125

Reviews:

Related manuals for 2006 GRIZZLY 125

Brands by name

Popular brands