Yamaha 2002 TDM900, Service Manual

Page: 81 / 475

2-39
B
B
C
D
A
B B
A
C
D
Q
CABLE ROUTING
SPEC
O Route the fuel drain hose (2 hoses), air filter case
drain hose and radiator reservoir tank drain hose
through the guide located behind the swingarm
head pipe. Do not make hoses to cross in the area
between C and D.
P Pass the radiator reservoir tank drain hose right
side of the battery negative lead.
Q Pass the fuel drain hose and air filter case drain
hose behind the battery negative lead.
K The O
2
sensor lead should not stick out from the
boss seat face to the outside of the vehicle.
L Bind the neutral switch, O
2
sensor, speed sensor,
sidestand switch and rectifier / regulator leads with
the clamp. Cut the tip with 3 to 8 mm left and make it
face to the outside of the vehicle.
M Fasten the ECU lead with the clamp installed to the
plate front side hole. Install the clamp to the outside
of plate.
N Fasten the cylinder identification sensor lead to the
inner side of the frame with a clamp.