manualshive.com logo in svg

Yamaha 2001 V Star XVS1100AN, Owner'S Manual, Page: 28 / 108

Share
Download
Yamaha 2001 V Star XVS1100AN Owner'S Manual Download Page 28

INSTRUMENT AND CONTROL FUNCTIONS

3-5

3

EAU00152

Clutch lever 

The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the ignition
circuit cut-off system. (See page 3-18
for an explanation of the ignition circuit
cut-off system.)

EAU00157

Shift pedal (XVS1100)

The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.

EAU01215

Shift pedal (XVS1100A)

The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.

NOTE:

Use your toes or heel to shift up and
your toes to shift down.

1. Clutch lever

1. Shift pedal

XVS1100

1. Shift pedal

XVS1100A

E_5pb.book  Page 5  Tuesday, January 23, 2001  11:59 AM

Summary of Contents for 2001 V Star XVS1100AN













































































































Reviews:

No comments