manualshive.com logo in svg

Yamaha 2001 V Star XVS1100AN, Owner'S Manual, Page: 102 / 108

Share
Download
Yamaha 2001 V Star XVS1100AN Owner'S Manual Download Page 102

9-1

9

EAU01039

9-

CONSUMER INFORMATION

EAU02944

Identification numbers 

Record the key identification number,
vehicle identification number and mod-
el label information in the spaces pro-
vided below for assistance when
ordering spare parts from a Yamaha
dealer or for reference in case the vehi-
cle is stolen.

1. KEY IDENTIFICATION NUMBER:

CA-02E

2. VEHICLE IDENTIFICATION 

NUMBER:

CA-02E

3. MODEL LABEL INFORMATION:

CA-01E

EAU01041

Key identification number 

The key identification number is
stamped into the key tag. Record this
number in the space provided and use
it for reference when ordering a new
key.

EAU01043

Vehicle identification number 

The vehicle identification number is
stamped into the steering head pipe.
Record this number in the space pro-
vided.

NOTE:

@ 

The vehicle identification number is
used to identify your motorcycle and
may be used to register your motorcy-
cle with the licensing authority in your
area. 

@

1. Key identification number

1. Vehicle identification number

E_5pb.book  Page 1  Tuesday, January 23, 2001  11:59 AM

Summary of Contents for 2001 V Star XVS1100AN













































































































Reviews:

No comments