background image

Safety Warnings 

Do not expose any of the FLX2 components to water, moisture, or high humidity.

Do not expose any of the FLX2 components to extreme high or low temperatures.

Do not expose any of the FLX2 components to lit candles, cigarettes, cigars, or to
open flames, etc.

Do not drop, throw, or try to bend any of the components, as rough treatment could
damage them.

Do not open the casings of any of the components of the FLX2 Conference Phone

Do not use any other accessories than Revolabs’ originals intended for use with
this product.  Use of non-original accessories may result in loss of performance,
damage to the product, fire, electric shock or injury.  The warranty does not cover
product failures which have been caused by use of non-original accessories.

Only use the power adapters provided to connect the components to the electric
mains.

Please note the two different power supplies delivered with the Conference Phone.
Ensure that you connect the right power supply with the FLX2 Base Station and
the FLX2 Charging Tray, respectively.

Do not open or try to modify any of the batteries delivered with the FLX2
Conference Phone components.  Replace batteries only with Revolabs approved
batteries.

Extreme heat, short circuits, or any attempt to open or modify the batteries might
cause them to ignite or explode.

Summary of Contents for 10-FLX2-002-POTS











































































Reviews: