PVR Recording
(Continued)
PVR Recording (DTV only)
19
Play
FB
13:39
[00:00:13]
82 J2
FF
Prev.
Next
Stop
Pause
1. Select a DTV program you desired to record, press button to begin
recording.
Now a control bar will appear at the bottom screen for you to control.
From the control bar you can obtain information such as channel name,
current time and recorded length, etc.
After a few seconds, this control bar will disappear and a mark will glitter
on the top left corder. (To recall the control bar, press EXIT).
2. To stop recording, press the button again.
Channel name
Current time
Recorded length
You can record DTV programs in two ways — instant recording and timer recording.
Instant recording (current program recording)
To record a program instantly, simply press the button on your remote control.
Timer recording (future program recording)
EPG (Electronic Program Guide) is your on-screen digital program guide for navigating, selecting, and discovering program
event by time, title, channel. You can also enjoy the scheduling of future recordings by setting the timer recording through
EPG.
1. Press EPG button to open the EPG window.
2. Press
3
or
4
button to select a channel. Press
6
or
5
to navigate and
select a desired program you want to record.
3. Press RED button to open RECORDER menu.
A. Mode select: From RECORDER menu, highlight Mode item, use
3
or
4
to select a recording mode. Once (recording once), Every Day
(recording everyday), Weekly (recording weekly), or AUTO
(automatically record your selected program ) can be selected.
B. If you set Mode to Once or Every Day or Weekly, you can set Start
Time and End Time freely:
!
Start Time: Highlight Start Time, then press
4
to open its submenu.
Press
6
or
5
to select Minute, Hour, Month, Date item,
use
3
or
4
to adjust the setting. When finished, highlight Close and press
OK.
!
End Time: Highlight End Time, then press
4
to open its submenu. Press
6
or
5
to select Minute, Hour, Month, Date item, use
3
or
4
to
adjust the setting. When finished, highlight Close and press OK.
C. Be sure to press OK button again to save the timer.
D. Repeat the above steps if you want to schedule more program recording.
( Note that only one program can be recorded at the same time)
Once the timer reached, the desired program will be recorded and stored
at the connected external memory device.
4. Press RED button to return to EPG window.
Note:
!
Future program recording can be done in standby mode. During recording in standby, the backlight will be off while the
Indicator turns blue to remind you that the set is at recording. Pressing POWER button can turn on the backlight.
!
During recording, do not change channel or source. If you do want to change channel or source, a reminding message will
pop up.
!
If no disk space left, a warning will pop up and the recording stops.
82 J2
Genius GO GO GO (PTH)
14 May 21:00- 22:00
Genius GO GO GO (PTH)
14 May 2011 21:57
22:00 - 22:30 Fullmetal Alchemist
22:30 - 23:30 Honey & Clover
23:30 - 23:55 Ah! My Goddess
23:55 - 00:00 Changer d’interieurs
00:00 - 00:50 The King Of Adventures
00:50 - 01:45 Wayward Kenting
01:45 - 02:40 Genius GO GO GO (PHT)
85
83
INFO
Info
Return
MENU
Record
Schedule
Remind
Select
Move
Mode
RECORDER
Programme
End Time
EXIT
Return
Select
Move
OK
Start Time
82 J2
Once
11/May 10:30
11/May 12:30
Schedule
