background image

 

2

 / 

3

 

 

-  Precautions on Use 

The following warnings and cautions are very important. Be sure to observe them. 

WARNING 

-  Keep your face away from the exhaust and discharge ports. Material may suddenly come out. There is 

a possibility of losing eyesight if it strikes eyes. 

-  Keep your face and hands away from the outlet when handling the check valve. Air-containing material 

may suddenly come out. There is a possibility of losing eyesight and injuring the hand. 

-  Do not aim exhalation part of this product at any person. Residual pressure may be left inside the gun 

even when the pump is not in operation. There is a possibility of losing eyesight if it strikes eyes. 

-  Gasoline is a high volatile fuel. Do not use it to clean the pump in any case, otherwise ignition or 

explosion may be caused. 

-  Modification of this pump may lead to death, bodily injury, or a failure. Do not modify it in any case 

because it involves a risk. 

 

-  The operator and maintenance engineer should read the operation manual thoroughly before operating 

this product and performing maintenance in respect of this product. 

-  Always wear proper safety equipments (facemask, ear plugs, and safety shoes, etc.) when installing, 

operating, and disassembling this product. 

-  Lock caster's stopper during and after the work, so that this product should not move unexpectedly. 

Also, do not use or leave this product in a slope or any unstable locations. This product moves freely 
when the caster is not locked and the damage only accident and the facilities pollution, etc. might occur. 
Such a secondary disaster becomes a responsibility on the user side. 

-  Make ground connection when working with flammable material or in explosive atmosphere. Rapid 

pumping of material can result in static electrical charge.   
Also, be sure to provide proper ventilation where a flammable atmosphere may exist. 

-  Execute the daily checkup. 

 

-  Use this product according to the product specification. 

 

-  Attach a valve (for stop in emergency) or regulator to the air supply pipe to keep supply air pressure 

under 0.7MPa. 

-  Be careful not to drop the cabinet when lifting it up to replace a pail. Catching a falling cabinet may 

cause hand injury by its edge. 

-  Turn off the air supply to stop pump operation when removing the pump from a pail. Being caught in a 

shovel, the lowest part of the pump, can cause hand injury and malfunction of the pump. 

-  Discontinue it when you feel a hazard or abnormality during the work. And correspond according to the 

troubleshooting. 

-  Stop pump operation immediately when a drum becomes empty. Running the pump dry will cause 

excessive vibration, resulting in reduction of pump life and damage to other equipment. 

-  Be very careful not to drop the grease gun. It may become damaged, resulting in leakage and 

malfunction. 

 

Summary of Contents for SKR-55 880870



















Reviews: