8
2.
Installation
2.1 Method of transport
When lifting the pump using a chain hoist or crane before transporting it, be sure to lift it by the
specified lift point (see [1. Names of parts and materials]).
WARNING
- Be careful that nobody will pass under the pump when you lift it. It would be very
dangerous if the pump should fall.
CAUTION
- See [9.1 Main specifications]. Remember that the pump is heavy, so extreme care must be
taken when lifting it.
- When moving the pump with a forklift or truck, make sure that the pump will not fall. If it
does, it may be damaged and/or cause bodily injury.
- NEVER try to move the pump by pulling the hose connected to the pump. The hose or the
pump may be damaged.
2.2 Installing the pump
1) Decide where the pump should be installed and secure a suitable space (see Fig. 2.1 A to C).
2) Remove the pump from the package and install it in the designated location.
3) When fixing the pump in place, use the cushions on the pump base, and secure the pump by
tightening the tied-down bolts a little at a time.
Fig2.1
