![background image](http://html.mh-extra.com/html/yamada/140-series/140-series_instruction_894484002.webp)
- Preface
Thank you very much for purchasing Yamada Pump.
The SR-140PWAL series is air operated pump units designed for use with a 20 litre pail. With a combination of a type 140 air
powered pump and an air operated lift, the unit is suitable for transferring/supplying high viscosity materials like grease.
Through pipes and hoses, material can be supplied to various sections of a work site. At each section, you can use material
anytime just by controlling an outlet valve.
The inductor plate provides a tight seal between the plate and a pail, prevents the forming of an air pocket in the suction port,
and helps to pump and transfer material efficiently until a pail gets empty.
There are two types of inductor plates: Flat packing type (F) and Tube packing type (T). You can choose the appropriate one
depending on material and its viscosity.
Furthermore, in the flat packing type, a punch plate is attached on the bottom of the inductor plate to make it possible to use
up material in a pail as much as possible.
The lift has removable caster wheels on the bottom. You can move the whole unit with a pail mounted. By removing these
wheels, the unit can be secured to the floor using anchor bolts.
- For Safe Operation
This document describes the items that are important for the user to operate this product safety, correctly, and efficiently.
Before operating this product, read this manual thoroughly, in particular, “Warnings and Cautions” at the beginning of this
manual, with a good understanding of its contents. Keep this manual carefully in an easy-to-access place so that the user
may refer to it whenever necessary.
- Warnings and Cautions
To use this product safely, be sure to observe the contents of the following description. In this manual, warnings and cautions
are indicated by using symbols. These symbols are intended to prevent death or serious injury that may be caused to the
operator or those who are around the product and damage that may be caused to the articles that are around the product, as
well as to use the product safely and correctly. Each symbol is indicated and has a meaning as shown below. Read the
description with a good understanding of its contents.
WARNING :
This indicates the existence of potential hazard which, if not avoided, will result in
death or serious injury.
CAUTION :
This indicates the existence of potential hazard which, if not avoided, may result in
bodily injury or in physical damage.
To indicate the contents of danger and damage, the following symbols are used together with the above indications.
This symbol indicates an act that is prohibited (prohibition). The concrete contents of prohibition are indicated
by the side of the indication.
This symbol indicates the contents that must be observed. The concrete contents of observance are indicated
by the side of the indication.