11
SRM-420ES, SRM-420TES
T410S, B410S
T410TS, B410TS
STARTER SYSTEM
11
2-3 Installing rewind spring
WARNING DANGER
Use of eye protection and safety gloves are
strongly recommended while working on re-
wind spring.
If rewind spring (A) is unwound from rope reel (B),
follow steps below.
1) Wind spring inside rope reel, hooking outer
hook (a) to holder (b) of rope reel (B) as shown.
2) Apply small amount of lithium based grease
to outside of rewind spring.
2-4 Assembling starter
3. Check for proper engagement of rewind spring
and rope reel by turning rope reel (A) clockwise
and counterclockwise.
A
b
a
1. Lubricate center post (c2) of starter case with
lithium based grease.
2. Assemble rope reel (A) with rewind spring (B)
engaging hook (b1) with hook (c1) of starter case
(C).
B
A
A
b1
c1
B
C
c2