Conductivity measurement
40
■
Conductivity measurement
The conductivity cell can be used to measure the conductivity, salinity, TDS, and
resistivity of a sample. Salinity, TDS, and resistivity are calculated from the measured
value of conductivity.
Press the
key to select the measurement parameter (refer to "Changing the
measurement parameter" (page 13)).
Conductivity can be measured using channel 2 of the instrument. Press the
keys to
set the main screen to channel 2.
The basic steps are the same for all measurement parameters, however, some settings
and operations are only valid for specific measurement parameters. Select the settings
and perform the steps that show the mark of the parameter you want to measure.
< Examples >
: Conductivity measurement
: Salinity measurement
: Total dissolved solids measurement
: Resistivity measurement
: All measurement parameters
