Turn to
unlock
Unlock
Lock
Re-set the drawer’s passcode:
(1) Unlock the drawer and you will see a small button under the
lock (see diagram).
(2) Press the little button with a ball pen/pin and hold it.
(3) Set your passcode and release the button to complete.
(4) Close the drawer and turn the lock clockwise to lock it .
7. Installation
below diagram.
(2) Remove the safe and drill the holes as marked. If needed, drop the plugs in the
drilled holes.
(3) Reposition the safe over the holes. Drop the bolts and washers through the
safe into the drilled holes.
Bolt X 2 pieces
(Please prepare the above)
Pencil
Spanar
Electric Drill
1. Mark the position with pencil
2. Put screws to check the holes
3. Remove safe to drill holes
