6.8 Change the Alarm Sensitivity
(1) Open the door and press to activate the system. Input the
Passcode (User Passcode / Master Code) and press to
(2) The display shows “SET” and press “4” to enter
Administration Setting Mode and press .
(3) Press “
8
” to scroll
UP
and “
0
” to scroll
DOWN
.
display shows “dONE” which means change is successfully
saved.
Menu code meanings:
AL-1:1, The Lowest sensitivity
AL-2:2
AL-3:3
AL-4:4
AL5:5, The Highest sensitivity
AL-ON, This alert function is on
AL-OFF, This alert function is off
*Note: If you switch off this alert function, user has to activate the alert function manually and
please follow below steps:
Close the safe door and press 2 times until you hear 2 “Beep” sound follows by the display
“dONE” and it means successful.
6.9 Button Sound On/Off
(1) Open the safe door and press to activate the system. Input
the Passcode (User Passcode / Master Code) and press to
(2) The display shows “SET”, press “5” to enter Administration
Setting Mode and press .
(3) The default setting is button sound on. The display will shows
“U-OFF” and it means the button sound is off; the display shows
“U-ON” and it means the button sound is on.
6.10 Change of Battery
When the safe is out of battery, the display shows “LO-BAT”
when you unlock the safe. When you see that, change the battery
as soon as possible.
Low battery
6.11 Drawer lock in Safe
(only available in certain models)
1st time to open the drawer:
(1) The default passcode is 0-0-0.
(2) Turn the lock anticlockwise like the diagram to open the
drawer.
