Yale YDR4110, User Manual

Page: 6 / 16

How to Use How to Use
10 11
2⃞ Press number 1 button
➞ Enter the Password
》 To Register Password
》 To Open Door with Password
Order Play Description
Press the Ⓘ (Registration) button in the back body again to
complete the Password registration.
Press the number 1 button and then the Password on the
keypad according to the voice guide. (4 to 12 digits)
1⃞ Touch with palm
2⃞ Enter Password
3⃞
Touch with palm
Order Play Description
Touch the keypad of the front body gently with
your palm or press [*] button to end.
Touch the keypad of the front body gently with your
palm.
Enter the registered Password in the
exterior number plate.
To Use Password
Passwords should be selected from 6 to 12 digits. [*] and [#] are not allowed.
• Make sure to leave the door open when registering a Password because you may accidentally lock
a door while trying to register or change a Password the first time.
• The previously registered Password will automatically be deleted when the new Password is registered.
• When registering a Password, the registered Password will be displayed on the keypad
(Smart Pad) in sequential order and, then, be disappeared.
1⃞ Press
(Registration)
button
Open the battery cover in the back body and
press
Ⓘ (Registration) button once.
3⃞ Press
(Registration)
button
Note
Fingerprint
》 Fingerprint Guide
• You may register up to 20 fingerprints. (The same applies to Normal/Security Mode)
※ Note that you may not register 20 fingerprints depending on the state of the registered fingerprints.
• Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials.
• Make sure to register a Password just for the case you fail to register a fingerprint.
• Make sure to leave the door open when registering a Password because you may accidentally lock
a door while trying to register or change a Password the first time.
• If an error occurs during registration, the process reverts back the beginning (entering fingerprint).
• If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration is completed.
• Same fingerprints can be registered repeatedly.
Operations
➞
1⃞ 2⃞ 3⃞
4⃞ 5⃞ 6⃞
➞
➞ ➞
Press and lift up the Guide
Bar on the fingerprint cover. You will see the fingerprint cover
being raised and start to open. Open the cover
completely
When the fingerprint cover is
completely open, the lamp will
be on. Start sweeping your fingerprint
through the sensor. Complete your fingerprint
recognition.
Normal Mode : It enables you to make individual registration, and open a door through the registered
fingerprint or Password.
Security Mode : It enables you to make individual registration and deletion, and open a door only when
the fingerprint number and the fingerprint match.
To change modes: Please refer to page 19.
Note
Directions