Yale YDR4110, User Manual

Page: 11 / 16

20 21
Settings Safety Feature
Directions
Forced Lock
》 Inside Forced Lock Setting
Set / Release Inside
Forced Lock Switch
Order Play Description
When the door is closed, move the Inside Forced Lock
Switch to
LOCK position so that a red sticker can be seen.
》 Outside Forced Lock Setting - Fingerprint
》 Outside Forced Lock Setting - Password
1⃞ Touch with palm
2⃞ Enter Password
Order Play Description
Press the [#] button for 5 seconds.
(A beeping sound sets off for 3 times.)
Touch the keypad of the front body gently with your
palm.
Enter the registered Password in the
exterior number plate.
1⃞ Enter fingerprint
Order Play Description
Enter the registered fingerprint on the fingerprint sensor
when the operation lamp(LED) is on.
2⃞ Press button for
5 seconds
Press the [#] button for 5 seconds.
(A beeping sound sets off for 3 times.)
3⃞
Press button for
5 seconds
• If you try to open a door with the Manual thumb turn from inside when the Outside Forced Lock is set, the alarm goes off.
• If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a fingerprint or a Password won’t work.
• When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and
the numbers will flicker from left to right and repeat twice.
Note
》 Break-in / Damage Alarm
Break-in: When someone tries to Break-in by opening
a door when it is locked, the alarm will go off.
Damage: When the front body was damaged
due to forced separation or drilling,
the alarm will go off.
Alarm Feature
The alarm sound continues for 30 minutes or until it is disarmed.
Method ❶ Enter the registered Password.
Method ❷ Enter the registered Fingerprint.
Method ❸ Press the interior Ⓘ button for 5 seconds.
•Even when the Inside Forced Lock mode is set,
the High Temperature Alarm releases the lock status
automatically.
》 High Temperature Alarm
•When there’ s fire, it detects the temperature of the inside.
It not only goes off an alarm but also releases the lock
status automatically.
Method ❶ Enter the registered Password.
Method ❷ Enter the registered Fingerprint.
Method ❸ Press the interior Ⓘ button for 5 seconds.
• If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off.
• If the Back body is exposed to direct sunlight for a long time, the temperature sensor may operate and
go off an alarm.
• Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High
Temperature Alarm goes off.
• If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise.
(It repeats the status for 30 minutes with alarm sound.)
Note
Release High Temperature Alarm
Release Trespass/Damage Alarm