Yale YDM 2111, User Manual

Page: 8 / 24

14 15
》 Outside Forced Lock Setting - CARD
Forced Lock
Contact card key
Order Play Description
Contact the card key on [card key reader] for 5 seconds
until you hear 3 beeps.
Settings Settings
》 To Release Safe Handle Setting
1⃞ Open the battery cover and
take out a hex wrench.
2⃞ Keep pressing the Safe Handle button.
Turn the set bolt found in next to
the handle to clockwise.
》 To Set Safe Handle
1⃞ Open the battery cover and
take out a hex wrench.
2⃞ Turn the set bolt found in next to the
handle to Counter clockwise until the
Safe Handle button comes out.
Volume Setting Feature
It enables you adjust the volume of various sounds from the product.
》 Volume Setting
To set volume switch
Order Play Description
The operation sound loudness is adjusted according to
the Volume Switch Setting.
(2 : Louder / 1: Lower / 0 : Mute )
Safe Handle Feature
The technology to prevent a forced attempt to drill a hole in the door and unlock the Doorlock has been applied.
• Be careful that the set bolt won’t detach when modifying the Safe Handle Setting.
• Even when the operation sound is set as ‘Mute,’the error and alarm sounds will go off.
Note
》 Inside Forced Lock Setting
Set / Release Inside
Forced Lock Switch
Order Play Description
When the door is closed, move the Inside Forced Lock
Switch to
LOCK position so that a red sticker can be seen.
》 Outside Forced Lock Setting - Password
1⃞ Open the cover
2⃞ Enter password
Order Play Description
Press the [#] button for 5 seconds.
(The beeping sound sets off for 3 times.)
Open the Keypad cover.
Enter the registered password on the keypad.
3⃞
Press button for
5 seconds
• If you try to open a door with the handle or the Manual Open/Close Device from inside when the Outside Forced Lock is set,
the alarm goes off.
• If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a cardkey or a password won’t work.
Note
Directions