Yale SmartHome Alarm series, User Manual

Page: 8 / 22

Part Arm 1/2/3
The Part Arm Mode is used when
the user wish to secure part of the
premise while leaving the another
area free to roam. Part arm #2 and
#3 will only be shown if they were
enabled by installer/engineer.
If Area 2 is defined, the system may
ask you to choose one of the areas
for arming (if the user have access
to both areas). To part arm the
system:
Keyfob- Press Part arm
Keypad- Enter pincode follow by
pressing Part arm.
Control panel- In Alarm off mode,
enter pincode and press ok. Select
Part arm 1, 2 or 3 and press ok.
Alternatively press “1” for Part arm
#1, “2” for Part arm #2, “3” for Part
arm #3. On the screen it will show:
time to exit
30 sec
When the entry delay time expires,
the control panel will emit a long
beep. The LCD will display Part Arm
1/2/3 and the system is now in the
part arm mode.
Lone Occupant
The Lone Occupant mode allows
a user to deactivate (bypass) any
sensors so that it will not trigger the
Alarm for one-time only operation.
This feature is ideal when the
occupant plans to stay in one area
for a prolonged length of time, and
they wish to arm all other areas.
Step 1. Select Lone Occupant or
just press the shortcut key 4 on the
control panel (under the user menu
screen). They system will now enter
300 seconds count down.
lone occupant
300 sec
Step 2. Any sensor which is
triggered (either by motion or by
pressing the test/learn button)
during the countdown period will
be bypassed. The panel will sound
a warning beep every time a sensor
is triggered during this countdown
period.
8