Table 16. Proc_Cal_014: Load Weight Zero Point (Continued)
A.
E-HYD CONTROL LEVERS
1.
LIFT/LOWER
DIRECTION LIFT ↓
DIRECTION
LOWER ↑
2.TILT
DIRECTION BACK
↓
DIRECTION FWD
↑
3.
*AUX 1 OR AUX
2
DIRECTION A ↑
DIRECTION B ↓
4.
*AUX 2 OR AUX
3
DIRECTION A ↑
DIRECTION B ↓
5.
*FOURTH
LEVER
6.
*THIRD LEVER
7.
SEAT ARMREST
*AUX 2 IS IN THE FOURTH LEVER LOCATION EXCEPT AS FOLLOWS: WITH 5 FUNCTION VALVE WITH CLAMPING ATTACHMENT,
AUX 2 IS IN THE THIRD LEVER LOCATION.
2.
JOYSTICK
1.
TILT BACK
2.
AUX 1
DIRECTION A ↑
DIRECTION B ↓
3.
LIFT ↓
4.
↑ LOWER
5.
AUX 2
DIRECTION A ↑
DIRECTION B ↓
6.
TILT FORWARD
7.
SEAT ARMREST
Step 1: Press
or
Until You See:
Main Menu
Calibrations
Step 2: Press
*
One Time
You Will See:
Calibrations
Lift Valve Output
Step 3: Press
or
Until You See:
Calibrations
Load Weight Set Zero
Step 4: Press
*
One Time
You Will See:
Load Weight Set Zero
Press
*
with No Load
Action 4:
Lower The Empty Forks/Attachment Approximately 51 mm (2 in.), Wait One Second And Immediately
Press
*
One Time.
Perform Proc_Cal_003: Save and Exit
if not performing additional calibration procedures.
8000 YRM 1134
Proc_Cal_014: Load Weight Zero Point
Confidential/Proprietary - Do Not Copy or Duplicate
41
