7
Inspection and maintenance
07.2020
93
ba
-o
.2
.6
.0
-us
-3
.2
-ys
|
A1
18
67
50
1 Re
v A
E
7.5.4
Drive-through mechanism for travel drive (UE-S776)
The drive-
through mechanism is suitable for beam flange widths “B” of 7.3…19.7
in; for
length “L” see
(1)
Drive-through shaft
(2)
Drive pinion
(3)
Spacer tube
(4)
Adjusting ring
Fig. 70
Guide the drive-through shaft (5) into both drive pinions (1) from the counterweight
side.
Slide on the spacer tube (2) and adjusting ring (3).
Adjust the drive-through shaft (1) to the dimension L1, dimension L2 must lie within
the table values.
Secure the adjusting ring (4) with the adjustment screw.
•
An air gap
E
must be present between the adjusting ring (4) and spacer tube (3).
After assembly of the travel drive, check that the drive-through shaft (1) slides easily.
B
L
L1
L2
E
[in]
7.3...8.7
20.1
3.3
5.1...3.7
0.08...0.16
8.7...14.2
24.4
3.3
6.8...1.3
14.2...17.7
29.1
5.3
3.9...0.4
17.8...19.7
29.1
3.3
2.3...0.4
Tab. 25
7.5.5
Underslung trolley UE-S776 with wire rope hoists YKE/SKE 4PS (4-strand)
Connecting pin and drive-through mechanism
•
Use connecting pin and drive-
through mechanism that fit beam area “B” (for
dimensions see Fig. 70).
