Page 19 of 35 pages
YAKUMO DVD TRAVELLER 8.0 ENGLISH
SYSTEM SETTINGS
Press
SETUP
on the Remote Control to enter the system setting main menu.
On the Remote Control, press either the
UP
or
DOWN
or
LEFT
or
RIGHT
arrow buttons to move to
the desired menu item and press
ENTER
to select the menu item.
Set TV Display mode to the correct ratio:
- Press
the
RIGHT
arrow button to enter the sub-menu. If you want to set the screen to “WIDE”, press
the
DOWN
arrow twice to move your selection until the “WIDE” item is selected, now press
ENTER
.
- Press
SETUP
to exit these system settings
Note:
three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS (Pan Scan). Different disc
formats will display different images depending this setting and the screen size used.. Hereunder is an example of
the different choices and the relation between the disc format and screen ratio.
4:3LB
Allow you to see
movies in their original
aspect ratio. The entire
frame of the movie will be
displayed. 16:9 recorded
movies will occupy a
smaller portion of the
screen and you will see
black margins above and
below the picture.
4:3PS
The movie will be
shown full screen without
any black margins, but
parts of the image will be
cut of from the right and left
side.
16:9
Allow you to see
movies in their original
aspect ratio, when
connected to a
widescreen TV. The
entire frame of the
movie will be
displayed.
16:9 Note:
depending
the DVD screen
format (e.g. 2.35:1),
the widescreen setting
may still have black
margins above and
below the picture.
