1031955F-3/8
set the bicycle forks
vertically onto the skewer.
Prevent damage
to your forks!
Use extra caution when installing,
or removing bikes with CARBon
fiBeR foRKs. fork tips can crack, or
bend if bike is not loaded vertically.
!
!
• to ReAttACH: Lift loop; forks on; CLose.
Knob may not need further adjusting with same bike.
ReLeAse foRKs & Reattach:
inseRt
bicycle forks
in skewer.
CARRyinG BiCyCLe:
Forks In Skewer.
Move loop down.
Tighten knob
completely.
Keep
lock
housing
inward!
• Lift loop
all the way up.
• tighten knob
one full turn.
forks must be grabbed securely!
do not attempt to transport bicycles with disk wheels.
do not transport bicycles with attached baby seats,
panniers, wheel covers, or full bike covers.
• SKS
®
Lock Cores
are optional.
•
To install
SKS
®
Lock Cores,
refer to
lock instructions.
MAintenAnCe:
apply any non-water
soluble lubricant
occasionally as
shown.
Pull the strap through
wheel spokes.
insert the strap end
behind the red button.
Tighten strap by
lifting the red tab up.
Check your wheel and
tighten the strap if
necessary.
Release the strap by
pushing the button.
seCURinG the Rear Wheel:
some bike wheels may be too narrow to allow a tight fit.
slide the strap in the tray until it rests against the rim.
Tighten.
• to ReLeAse:
lift
loop to free forks.
iMPoRtAnt:
With loop up—
loosen
oR tighten knob as
needed to
CLose LooP.
You should feel resistance
against your hand.
