background image

;;;

;

;;;;

;;;;

;;;;

;;;;

1032666B-2/8

INSIDE
THE BOX:

Push plugs into
unused holes.

INSIDE OF BOX:

Set metallic plate

onto bolts.

ATTACH KNOBS:

Engage the threads of the bolts
with one slight turn—no more.

The knobs must be very loose.

Attach adhesive pads
to metallic plates.

• T-BOLT:

Insert through large
plate only.

Curved bracket
should swing freely.

A friend could help

with this part.

ON THE OUTSIDE OF THE BOX:

• CARRIAGE BOLT:

Insert  through curved bracket,
then through large plate.

LOAD BOX ONTO
RACKS.

Curved brackets should swing
freely.

Be sure the brackets are not
interfering when box is
positioned on the bars.

DO NOT LOAD THE BOX ONTO THE CAR YET.

MEASURE THE DISTANCE BETWEEN THE CROSSBARS ON YOUR RACKS.

FOR BARS

THAT MOVE OR SLIDE:

Do not drill

additional

holes.

Measure from bar to
bar to determine
which sets of holes
your box will use.

FOR BARS

THAT CAN’T MOVE:

(INCLUDING Q TOWERS)

Q TOWER NOTE:

NEVER REPOSITION

THE TOWERS!

TIGHTEN YOUR

CROSSBARS IF YOU

LOOSENED THEM.

Bars should be
positioned at 30" to
36" apart for 

Long

Boxes.

Position bars at 24"
to 36" apart for the

SpaceCadet 

only.

Long Boxes

SpaceCadet

0"

       33"– 36"

0"

       30"– 36"

0"

  18"– 36"

0"

  24"– 36"

Summary of Contents for SpaceBooster









Reviews: