M
2
M
4
+
M
2
M
4
+
1033430H-7/33
windshield
rooftop
trim
Correct measurements
can be found in the Q
Clip box.
If your vehicle is not
listed or the clip sheet
is not in the Q-Clip box
check yakima.com/
measurements, contact
your dealer or call 888-
925-4621.
Center rack on vehicle.
Center racks side to
side by measuring from
the door frame to tower
base. measuring points
and distances on both
sides must be equal.
• use the combination of
m2 and m4 measurements
(from Clip Sheet).
• measure the shortest
distance from leading edge
of tower base to nearest
painted roofline corner.
• Once positioned DO NOT
mOVE.
Position Towers in rear.
• Clean vehicle roof where towers will set.
• Set the assembly on the roof.
Set measurement.
REAR Of VEHICLE
Overview
Prepare for
installation
Install towers
in front
Install towers
in rear
Perform safety
checks
YOU ARE
HERE
FOR EXAMPLE:
M2 = 6”
+ +
M4 = 32”
Tundra
Tower Location = 38”
