28-13-355-Rev4
4/10
ASSEMBLE LNL PLATFORM
Assemble Platform according to the LockNLoad Platform Assembly instructions
Steps 1 - 9 (Pages 4 - 7).
10
LIFT PLATFORM ONTO VEHICLE
With the help of an assistant, carefully lift assembled Platform up and onto
Mounting Blocks on vehicle roof. Centre Platform evenly on Legs so there is equal
overhang on both sides and ideally at front and rear.
Follow LockNLoad Platform Vehicle Mounting
instructions from Step 3 to complete install.
NOTE - Wind Deflector, if used, is to be installed at the front of the vehicle (sold
separately).
11
SECURE LEGS
Secure Claw assemblies to the vehicle rail using a 5 mm Allen Key or Torque
Wrench. Torque to 4 Nm. Due to the geometry of the Everest flush rail, a small
gap may appear on the inboard face. This is acceptable and has been tested.
9
