28-13-356-Rev1.0
6/9
INSTALLATION OF LOCKN’LOAD PLATFORM TO FLUSH RAIL LEGS
1
REMOVE LEG COVERS
Using the keys supplied in the
LOCKN’LOAD Leg Kit (sold separately),
remove all Leg Covers.
Push padded Foot Extrusions into the
rear cavity of LOCKN’LOAD Legs. (When
assembled onto a vehicle this will click into
position).
5
6
LEG ASSEMBLY
Slide Claw assemblies into LOCKN’LOAD
Legs, as shown.
Insert the M6 Bolt and Washer from the Leg
kit into the Leg and wind (six revolutions)
into the Grip Plate.
3
Push padded Claw Extrusions into the
Clamp Claws. (When assembled onto a
vehicle these will click into position).
4
FOOT ASSEMBLY
Slide Rubber Foot Pads onto each Foot
Extrusion.
Slide Rubber Clamp Pads over each of the
Claw Extrusions.
CLAW ASSEMBLY
Insert a Pinned Grip Plate into each of the
Clamp Claws from the LOCKN’LOAD leg kit.
2
