1033359E - 7/24
Use extra strap to
secure the wheel.
the weight of the bikes
may cause the straps to
slack or dislodge hooks.
tighten uppeR and side stRaps
again afteR biKes aRe loaded.
secure the front
wheel on the bike
closest to the car.
on the inner hubs,
pull and turn the
red triggers.
• make sure that both triggers
are seated in the hub!
• move both arms up and down,
they must snap into place!
rotate load
arms to
just above
horizontal.
eXtend load aRms.
load heaviest biKe fiRst
tightly secure straps diagonally
over bike frame and seat tube.
The straps can be routed
under the cables.
alternate bike directions
to avoid interference.
arrange bike frame in the cradles for greatest stability.
always load first bike with
chain away from vehicle.
always use the cradles
closest to the vehicle.
attach one rubber strap to each
cradle and stabilizer.
To slide cradles along the carrier
arms, close cradle and stabilizer. Close
cradles while loading bikes.
\
stabilizer
loaD remaInIng
bIKes.
unlIsteD vehIcles:
load aRms
cautIons:
• adjust load arms to just above horizontal.
• make sure bikes have sufficient clearance
from the ground.
replace reD trIggers.
if the arms do not
snap into place,
adjust triggers and
move arms until the
arms are in place.
