Ceiling
Floor
RE210P Honeywell
®
Compatible PIR Motion Sensor
PIR Motion Sensor
alarms when motion is sensed or when
the external contact is opened. It is battery powered and
requires no installation tools. A Pyroflex
™
sensor with
HighBar
™
signal processing allows for industry-leading pet
immunity and catch performance.
Features
• Industry-leading pet immunity and catch performance
• Supports both motion zone and an external contact zone
• Mountable on walls or in corners
• 5 year warranty
Enroll
by placing the panel into wireless enrollment mode and
then tripping the tamper three times.
Enrollment Tips
• Program as an
RF
type (Supervised RF)
• Loop 1 = Motion
• Loop 2 = External Contact
• Loop 4 = Tamper
Install
using the included 3M VHB
®
tape to adhere the motion
sensor on a wall or in a corner. The tape should be applied
to the
back
when wall mounting or to the
back bevels
when
corner mounting. Alternatively, screw mounting can be
done by punching out the screw mounting holes.
Installation Tips
•
Mount 7.5 to 9.5 feet from the floor for an
optimal balance between catch performance
and pet immunity.
• Remove the cover and circuit board before
trying to punch out the screw mounting holes.
• Ensure the bug foam stays intact and
snug around the IR sensing element when
re-installing the circuit board.
External Contact
(not evaluated by ETL)
• Use a
normally-closed
contact because the
motion sensor will transmit an alarm when it
sees the external contact
open
.
• Do not use end-of-line resistors.
Mounting Screw Holes
Verify proper enrollment and operation using your control panel’s installation manual
.
IN
STALL
G
U I D E
I
