1033425B-3/15
position the staCkers
on the Crossbars
Loop strap
under crossbar
at least once.
Loop strap
inboard of
crossbar tower.
Distance of Stacker
from crossbar tower
is exactly the width of
kayak(s) on edge.
Follow these three rules when strapping kayak(s):
Additional straps may be required for more than 2 kayaks.
Distance from
the stacker to
the tower should
equal the width
of your kayak (or
kayaks) on edge.
COMPLETELY TIGHTEN THE STACKERS NOW.
• Tighten hex keys on SnapArounds.
• Tighten MightyMount bolts with wrench.
LOOP STRAP
AROUND
STACKER POST.
Cross lines and
set aside.
LOAD BOAT.
• Bring straps up and over boat.
• Hang to the side.
• Hook the strap at the
top of the stacker.
• Slide buckle up so
that it hangs at top
edge of boat.
load the boat— tie it down with straps
ADDED SECURITY:
• Pass strap inboard under
crossbar.
• Pass strap under boat
around base of stacker.
• Pass under crossbar again
and attach to buckle.
• Insert end of strap
into buckle as
shown.
• Slide rubber cover
back into place.
TIGHTEN STRAPS:
• To tighten straps,
hold and pull.
• Secure extra strap.
ConneCt
and
tighten
