1033546B-3/18
CLoSe Carrier with firm
preSSure
attaCh upper baiL
to SLider top
move SLiding
baiL to expoSe
SCrew hoLeS.
inSert SeCond baiL
SCrew through
upper baiL onLy.
SLide Carrier aSSembLy onto CroSSbar
round barS
Square barS
faCtory barS
repeat assembly
for remaining
hardware
If desired, attach vinyl pads to underside
of factory bars to protect finish.
aSSembLe
• Insert base
screw
through hole
in pad.
• Position slider
top onto screw.
• Align the base screw
with square nut (inside
upper bail.)
• Use hex wrench to
engage the screw
and nut.
• Do not tighten
yet.
