1033285C - 7/12
• En tenant le pied appuyé
contre le longeron, serrer le
boulon de la fourchette (avec
la clé Allen fournie).
SUR
UN
PIED
SEULEMENT
• En serrant le boulon, s’assurer qu’il
n’y a pas de jeu et que le pied est
bien appuyé contre le longeron.
À l’arrière du pied,
vérifier que la
fourchette est bien
accrochée dans le
longeron.
SUR L’AUTRE PIED, À L’AUTRE BOUT DE LA MÊME BARRE:
SERRER LE BOULON
DE LA BARRE
TRANSVERSALE.
VÉRIFIER QUE LA
FOURCHETTE EST
ACCROCHÉE DANS
LE LONGERON.
SERRER LA
FOURCHETTE
CONTRE LE
LONGERON.
De nouveau, un pied à la fois:
REFAIRE L’OPÉRATION 6:
• Appuyer le pied contre le longeron
• Accrocher le longeron
• Empêcher les patins de se retourner
REFAIRE L’OPÉRATION 8:
• Tirer vers l’extérieur
• Serrer la barre transversale
• Serrer la fourchette
• Vérifier que la fourchette est
accrochée dans le longeron
PLACER LES PIEDS ET LA BARRE ARRIÈRE À ÉGALE DISTANCE DES PIEDS AVANT.
• En tirant le pied vers l’extérieur,
serrer le boulon de la barre
transversale avec la clé fournie.
ENSUITE…
LA BONNE DISTANCE ENTRE LES BARRES TRANSVERSALES:
L’écartement à donner aux barres transversales Yakima dépend des
accessoires que l’on compte y installer. Consulter la table d’écartement
des barres transversales (dans la liste de compatibilité Yakima “Fit List”)
pour connaître l’écartement nécessaire en fonction de vos accessoires.
ATTENTION: CONTRÔLER QUE LE PREMIER PIED EST TOUJOURS
BIEN APPUYÉ CONTRE LE LONGERON.
Pour certains longerons très larges,
il faudra peut-être desserrer le
boulon pour que la fourchette
s’engage dans le longeron.
Soulever le rebord
de caoutchouc pour vérifier que
le longeron est bien appuyé dans la courbure du pied.
Il ne doit pas y avoir de jeu entre le pied et le
longeron dans la courbure.