1033590-2/6
Remove end cap.
Press in the tabs on either side
and pull end cap to remove.
Slide off clamp.
Slide off the wheeltray and clamp.
Remove long knob and t-bolt.
Unscrew the knob to
separate from t-bolt.
Install t-bolt adapter and t-bolt.
•
Insert t-bolt adapter through hole in top of
clamp into lower hole of clamp as shown.
•
Insert t-bolt through clamp and t-bolt
adapter pressing firmly to snap t-bolt into
t-bolt adapter.
Attach short knob.
Slide clamp back on.
Replace the clamp and
wheeltray onto bike mount.
Reinstall end cap.
Replace the end cap.
For installation on
round bars
USE ONLY
UPPER NOTCH with
bail adapter!
IF YOU NEED FURTHER TECHNICAL ASSISTANCE OR REPLACEMENT PARTS:
Please contact your dealer or call us at (888) 925-4621 Monday through Friday, 7:00
a
.
m
.
to 5:00
p
.
m
.
PST.
•
Install bail adapter onto
bail as shown.
•
Install short knob once
rear clamp is in place
around crossbar.
Fully tighten down clamp. Verify
that your installation is complete.
NOTE: T-bolt adapter must
be orientated as shown.